Filter
Top Products
Getting Started with the WRVS4400N Router
Installing the Router
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 24
4
Installing the Router
To prepare the router for installation do the following:
• Obtain the setup information for your specific type of Internet connection
from your Internet Service Provider (ISP).
• Power off all of your network hardware, including the router, PCs, and cable
modem or DSL modem.
Perform the steps in this section to install the hardware.
STEP 1 Connect one end of an Ethernet network cable to one of the LAN ports (labeled 1-
4) on the back of the router. Connect the other end to an Ethernet port on a PC.
STEP 2 Repeat step 1 to connect up to four PCs, switches, or other network devices to the
router.