Filter
Top Products
fn=3： Function 3 Setting Memory Switch Value
[Caution]
[The specification which depend on the model]
[Outline] [The specification which is common to the model]
[Code] <1D>H<28>H<45>H<pL><pH><fn>［<a1><b18>…<b11>］…[<ak><bk8>…<bk1>]
[Range] 10≦(pL+pH×256)≦65535
GS ( E pL pH fn [a1 b18...b11]...[ak bk8...bk1]
• MSW7 to MSW10 cannot be changed by this command. They can be changed by the
setting of customize value.
CT-S2000/CT-S4000/CT-S310
• Changes the memory switch set in a to the value set in “b”.
a = 1、2、3、4、5
CT-S2000/CT-S4000/CT-S310/PMU2XXX
a=1、2、3、4
CT-S300
a=1、2、3
CT-S280/BD2-2220
b=48、49、50
fn=3
- 155 -
b Function
48 Sets corresponding bit to OFF.
49 Sets corresponding bit to ON.
50 Does not change corresponding bit.