Filter
Top Products
CT-S300/CT-S310
• Printer information configuration on and after transmitted n=65 is shown
below.
n Type of Printer ID Specification Value (Hex.)
Kind of Printer
Information
1、49
Model ID
CT-S300,CT-S310 35
n Information
2、50
Type ID Refer to table “Type ID” below
65 Firmware version Differs by firmware version.
3、51
ROM version ID Differs by ROM version.
66 Manufacturer name CBM,CITIZEN
4、52
Black mark Length Depends on Black mark paper (mm)
67 Model name CT-S300, CT-S310
Japanese Kanji specifications: KANJI
Kinds of multi-language
fonts
Hangul specification：KOREA
Type ID If n = 2, 50 is specified:
69
Chinese specifications：CHINA
GB18030
Bit Meaning Hex. Decimal
Refer to table “DSW” below
0 Equipped for 2 byte code support 01 1
112 State of DSW
(only serial model)
1 Equipped with auto cutter 02 2
Thermal paper 00 0
• Sends printer information specified by n=65 or more.
2
Black mark paper
04 4
(when Black mark paper is selected)
Hex. Number of Data
Header 5FH 1
3 Undefined -- --
20H～7FH
Data Subject to item to be responded
4 Unused 00 0
NULL 00H 1
5 Undefined -- --
6 Undefined -- --
DSW If n = 112 is specified:
7 Unused 00 0
Bit Function Hex. Decimal
n = 4, 52 specified (only for B.M specs)
Dip switch [DSW5] is OFF 00 0
0
The Black mark length and mark interval currently used are returned in
4-byte code.All fractional parts in millimeters are rounded off.
Dip switch [DSW5] is ON 01 1
Dip switch [DSW6] is OFF 00 0
1
Byte 1 + Byte 2 x256 = Black mark interval
Dip switch [DSW6] is ON 02 2
Byte 3 + Byte 4 x256 = Black mark length mm
Dip switch [DSW7] is OFF 00 0
2
Dip switch [DSW7] is ON 04 4
Black mark paper
Dip switch [DSW8] is OFF 00 0
(2)
3
Dip switch [DSW8] is ON 08 8
4 Reserved 00 0
(1)
5 Reserved 00 0
6 Fixed 40 64
7 Fixed 00 0
*only serial model
- 230 -