Filter
Top Products
- 222 -
ESC = n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Data input control
[Code] <1B>H<3D>H<n>
[Range] 0≦n≦255
[Outline] [The specification which depend on the model]
• Selecting equipment for which data input from the host is valid.
• Each bit of “n” indicates as follows.
• When the printer has not been selected, this printer abandons all the received data until it is
selected by this command.
Value
Bit Equipment
0 1
0 Printer Invalid Valid
1 Not defined — —
2 Not defined — —
3 Not defined — —
4 Not defined — —
5 Not defined — —
6 Not defined — —
7 Not defined — —
[Caution] • Even when the printer has not been selected, it can become BUSY state through printer
operation.
• When the printer is deselected, this printer discards all the data until it is selected with this
command. (Except DLE EOT, DLE ENQ, and DLE DC4)
[Default] n=1