Filter
Top Products
- 277 -
●MSW1-3： Busy condition
[Outline] Select the condition that printer is BUSY. Automatic status send function also runs.
OFF(0) ON(1)
Busy Condition Buffer full/Off-line Buffer full
ON (1) OPERATION: If receive buffer is full, printer is BUSY.
Automatic status send （ASB） function is enabled.
OFF (0) OPERATION: If receive buffer is full or off-line, printer is BUSY.
Automatic status send （ASB） function is disabled.
[Additional Description]
Even if ON is selected, printer enters BUSY status when power is turned on or reset by I/F or at self
test print
Printer Status
MSW1-3
OFF
MSW1-3
ON
Power-up or reset used by I/F
● ●
Self-print
● ●
Cover open
● ―
Paper-feed by FEED SW
● ―
Paper-end (including print stop in PNE)
● ―
Error generation
● ―
Off-line
Waiting during macro run by FEED SW
● ―
Buffer full Receive buffer full
● ●
●MSW1-4： Receive error character
[Outline] Select handling of data detected where the serial communication detects the receive data framing
error, overrun error and parity error.
OFF(0) ON(1)
Receive Error Print ? No Print
ON (1) OPERATION: Not printed as “?”
OFF (0) OPERATION: Printed as “?”