Filter
Top Products
- 74 -
2.2.5 Line Feed Span Commands
ESC 2
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model
PMU2XXX
[Function] Specifying 1/6-inch line feed rate
[Code] <1B>H<32>H
[Outline] [The specification which is common to the model]
[The specification which depend on the model]
CT-S280/CT-S300/BD2-2220/CT-S310/PMU2XXX
The line feed rate per line is specified by 1/6 inch.
CT-S2000/CT-S4000
The line feed rate per line is specified by MSW5-2 setting.
[Caution] Line feed rate can be specified respectively for both STANDARD MODE and PAGE MODE.
[Default] CT-S280/CT-S300/BD2-2220/CT-S310/PMU2XXX
Approx. 4.23mm (1/360 inches)
CT-S2000/CT-S4000
(1) When memory switch 5-2 is OFF:
Approx. 4.23mm
(2) When memory switch 5-2 is ON:
Approx. 3.75 mm