Filter
Top Products
100
For Assistance, Call 1-800-435-7329
Operations
I cannot receive documents.
I cannot receive documents
automatically.
The recording image is faint.
The printing quality is poor.
A blank sheet is ejected after the
received documents are printed out.
¡The telephone line cord from the single telephone line is connected
to the EXT jack on the unit. Connect to the LINE jack.
¡The receive mode is set to the TEL mode. Set to the TEL/FAX,
FAX ONLY or EXT.TAM mode.
¡The time to answer the call may be too long. Decrease the number
of rings (see pages 59 and 65).
¡The sender transmitted a faint document. Ask them to transmit a
clearer copy of the document.
¡The thermal head is dirty. Please clean it (see page 114).
¡Some paper has instructions recommending which side to print on.
Try turning over paper. We recommend smooth paper such as
Hammermillg jet PRINT for clearer printing.
¡The receiving reduction rate is not programmed correctly. Program
the proper reduction rate (see page 72).
CAUSE & REMEDYPROBLEM
Fax reception
PROBLEM CAUSE & REMEDY
¡The glass or rollers are dirty. Please clean them (see page 114).
¡The thermal head is dirty. Please clean it (see page 114).
¡The film is not inserted correctly. Insert it correctly (see pages 110
and 111).
¡The film is not inserted correctly. Insert it correctly (see pages 110
and 111).
¡Some paper has instructions recommending which side to print on.
Try turning over paper. We recommend smooth paper such as
Hammermillg jet PRINT for clearer printing.
¡The film is not inserted correctly. Insert it correctly (see pages 110
and 111).
A dirty pattern or a black line
appears on the copied documents.
The copied image is distorted.
The document is not copied
properly.
The copied document is blank.
The printing quality is poor.
A paper jam occurs during copying.
Copying
When a function does not work, check here before
requesting help (cont.)!