Filter
Top Products
52
Sending documents from memory!
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages, based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 124.
Setting memory transmission!
1
Press (MENU).
Display:
2
Press K, then A E.
3
Press (START/COPY/SET).
4
Press or to select “ON”.
¡If this feature is not required, select “OFF”.
5
Press (START/COPY/SET).
6
Press (MENU).
SETUP ITEM [ ]
MODE=ON [Ÿÿ]
MODE=OFF [Ÿÿ]
MEMORY XMT
SYSTEM SET UP
Transmitting documents from memory!
1
Insert the documents FACE DOWN.
2
Enter the telephone number by using regular
dialing, one-touch dialing, speed dialing or the
electronic telephone directory.
3
When using regular dialing, press
(START/COPY/SET).
¡The documents will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will transmit
the documents.
¡The amount of memory used will be shown as a
percentage on the display.
Display:
Amount of memory used
PAGES=01 05
Note:
¡The stored documents will be automatically erased after transmission.
¡To cancel the memory transmission, press (STOP) during or after scanning the documents.
¡If you select the fine, super fine or halftone resolution, the number of documents that can be sent will be
decreased.
¡If the stored documents exceed the memory capacity, the transmission will be canceled.
Dial keypad
FACE DOWN
(STOP)
(START/COPY/SET)
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
(MENU)
Dial keypad
Sending Faxes