Filter
Top Products
67
Fax/Copy
Receiving Faxes
How the unit will answer in each receive mode!
1 2 3
4 5 6
7 8 9
0
Setting the distinctive ringing pattern assigned for fax!
Program the ringing pattern of the facsimile number that is assigned by your telephone company.
1
Press (MENU).
Display:
2
Press K, then C A.
3
Press (START/COPY/SET).
4
Press or to select the ringing pattern
assigned to the facsimile number.
A: Standard ring (one long ring)
B: Double ring (two short rings)
C: Triple ring (short-long-short rings)
D: Other triple ring (short-short-long rings)
OFF: Turns off the ring pattern detection feature
(pre-selected setting).
5
Press (START/COPY/SET).
¡The unit will print an information list.
6
Press (MENU).
SETUP ITEM [ ]
PRINTING
MODE=OFF [Ÿÿ]
RING DETECTION
SYSTEM SET UP
(MENU)
(START/COPY/SET)
Dial keypad
■ TEL mode: In this mode, you have to answer all calls manually.
—If you hear a fax calling tone (slow beep) or cannot hear voice, press
(START/COPY/SET) to receive documents.
■ TEL/FAX mode: When a call that matches your selected ringing pattern is detected, the unit will
automatically answer the line and activate the fax function to receive documents.
When a call having another ringing pattern is received, the unit will ring until you
answer the call.
■ FAX ONLY mode: In this mode, the unit will answer all calls automatically and activate the fax function.
■ EXT.TAM mode: When a call that matches your selected ringing pattern is detected, the unit will
automatically answer the line and receive documents.
When a call having another ringing pattern is received, the facsimile unit and the
answering machine will activate depending on the call.
—If a voice call is received, the answering machine will record the voice message.
—If a fax call is received, the facsimile unit will receive documents automatically.
Note:
¡The unit automatically answers a distinctive ring call after the second ring. To change the number of rings,
change the FAX ONLY mode ring count (page 59) after setting the ringing pattern.