Filter
Top Products
70
1
Press (MENU).
Display:
2
Press K, then C C.
3
Press (START/COPY/SET).
4
Press or to select “ON”.
¡If this feature is not required, select “OFF”.
5
Press (START/COPY/SET).
6
Press (MENU).
—If this feature is set to “ON”, an arrow mark will
be displayed.
SETUP ITEM [ ]
MODE=ON [Ÿÿ]
MODE=OFF [Ÿÿ]
FILM/PAPER SAVE
SYSTEM SET UP
Film/Paper save!
Use this feature if you wish to save film and recording paper when receiving two or more faxed pages. When
this feature is ON, the unit will reduce documents to half their length and print out two pages of documents on
one page. A boundary line will be printed out between the documents.
Important:
¡This feature will not work when the other party sends a document in fine resolution or other nonstandard
resolutions.
Sample of a paper save printout:
Note:
¡When a reduced document is longer than the
recording paper, it will be printed on two
pages. The continuation will be printed on the
next page and there may be wasted space.
In this case, paper and film will not be saved.
If you wish to fit the document onto one
page, set this feature to off and program a
suitable reduction rate for reception (see
page 72).
¡When documents are longer than legal size,
the unit will not print the next page of the
document on the same page.
¡Paper and film will not be saved for a one
page document and the last page of odd
numbered documents (3, 5, 7 pages, etc.).
Original document
(1st page)
ABCDEF
ABCDEF
Printed document
ABCDEF
ABCDEF
abcdef
abcdef
(2nd page)
abcdef
abcdef
Boundary line
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
(MENU)
Dial keypad
Receiving Faxes
FILM/PAPER SAVE
MEMORY%
00