Filter
Top Products
80
Setup
Installing the Multi-Function Center software!
1
Start Windows 3.1/3.11/95 and close all
applications.
2
Insert disk #1 into disk drive A (or B).
3
Windows 95 users:
Click Start and select Run... .
Windows 3.1 or 3.11 users:
From the Program Manager, click File and
select Run... .
4
At the command line, type “a(or b):\setup” and
click OK.
5
Follow the instructions on the screen until all
diskettes (disk #2, disk #3) have been
installed.
6
Remove the disk from the disk drive and click
Finish to reboot your PC.
For Windows 3.1
For Windows 95
Included applications!
The Multi-Function Center contains the following applications and files.
» Viewer Enables you to scan a new image or open an existing image, to print, fax or edit that
image.
» Copier Enables you to make a copy after scanning a document on the facsimile unit and
setting the reduction, etc., from your PC.
» Launch Pad Enables you to launch any Windows application with a single mouse click.
» Send From Fax Enables you to fax a paper document placed on the facsimile.
» Address Book Enables you to list your personal information database of fax and phone numbers.
» Finder Enables you to access your faxes and scanned documents by File Name and Key
phrases.
» Message Center Enables you to manage all incoming and outgoing fax messages and print jobs. The
Message Center application contains five windows that may remain open or be
minimized to one icon within the Message Center main window.
» Register Used to register your unit with Panasonic by fax, mail, phone or E-mail.
» ReadMe Please read this file before using the Multi-Function Center software.
» Upgrade Now! Information for a Multi-Function Center upgrade.
Note:
¡If other communication software which uses the serial port has been installed, the communication setting
may be changed and the communication software may not function properly when the Multi-Function Center
software is installed.
¡The dialog box images may differ according to applications.