CK Electric Part KX-FMC230 All in One Printer User Manual


 
29
Initial preparation
Volumes
Adjusting volumes!
» Ringer volume
4 levels (high/middle/low/off) are available.
Press (VOLUME) ( / ) while the unit is idle.
To turn the ringer off:
1. Press (VOLUME) ( ) repeatedly until the
following message is displayed.
2. Press (START/COPY/SET).
While the ringer volume is set to off:
The display will show the following message.
When receiving a call, the unit will not ring but will
show the following message.
» Speaker volume
8 levels (high to low) are available.
Press (VOLUME) ( / ) while using the
speakerphone.
INCOMING CALL
RINGER OFF
YES: PRESS SET
RINGER OFF=OK?
(LOUD/RINGER)
J
@
TALK/BATT LOW
indicator
Main unit!
Handset!
» Ringer volume
3 levels (high/low/off) are available.
Be sure the TALK/BATT LOW indicator light is off.
To set to high or low:
Press (LOUD/RINGER).
To turn the ringer off:
While pressing (LOUD/RINGER), press @ until
2 beeps sound.
To turn the ringer on:
Press (LOUD/RINGER).
¡The ringer sounds at the high level.
» Handset volume
2 levels (high/normal) are available.
Press (LOUD/RINGER) while talking.
» Selecting the ringer tone (2 types)
When the TALK/BATT LOW indicator light is off,
press (LOUD/RINGER), then press J within
5 seconds. The selected ringer tone sounds.
(VOLUME)
(START/COPY/SET)