Filter
Top Products
68
1 2 3
4 5 6
7 8 9
0
Receiving using an extension telephone!
1
Press (MENU).
Display:
2
Press K, then D A.
3
Press (START/COPY/SET).
4
Press or to select the desired setting.
¡If this feature is not required, select “OFF”.
5
Press (START/COPY/SET).
6
Enter the new code number.
7
Press (START/COPY/SET).
8
Press (MENU).
SETUP ITEM [ ]
CODE=U9
MODE=ON [Ÿÿ]
FAX ACT. CODE
SYSTEM SET UP
Using an extension telephone to receive fax
messages!
If you have an extension telephone connected to your facsimile unit or on the same line, it is possible to
receive a manual fax message. Using the extension telephone, dial the fax activation code.
You do not have to go to the facsimile unit and press (START/COPY/SET).
Important:
¡To activate this feature, use a touch tone telephone as the extension telephone and enter the fax activation
code FIRMLY.
¡The fax activation code is set to “U9” as a pre-selected setting.
1
When a call is received, lift the handset of the
extension telephone.
2
When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter the fax activation code FIRMLY.
3
Hang up the handset.
¡The facsimile unit is set to receive documents.
Changing the fax activation code!
This code can be from 2 to 4 digits in length using numbers 0 through 9, and the character *.
Note:
¡Some special telephone company services
will require you to press a service access
code. If you subscribe to such services, all or
part of the fax activation code must be
different from the service access code.
¡If the fax activation code is set to “0000”, this
feature will not work properly.
To the EXT jack
or the same line
Extension telephone
(MENU)
(START/COPY/SET)
Dial keypad
Receiving Faxes