Filter
Top Products
79
Multi-Function
Center/PC
Setup
Connecting to a computer!
To run the Multi-Function Center software, you need the following software and hardware.
¡IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended)
¡Microsoft Windows 3.1, 3.11 or Windows 95
¡Hard Disk drive with at least fourteen (14) MB of available storage
¡RS232C Serial Port
Note:
¡The unit cannot print on envelopes.
» If your PC has a 9 pin com port:
RS232C cable
(Included)
To COM port
25 Pin Male
25 Pin Adaptor
(Included)
9 Pin Female
» If your PC has a 25 pin com port:
9 Pin Female
RS232C cable
(Included)
25 Pin Male
To COM port