Filter
Top Products
64
Receiving Faxes
1 2 3
4 5 6
7 8 9
0
FAX
AUTO RECEIVE
1
Press (MENU).
Display:
2
Press K, then @ H.
3
Press (START/COPY/SET).
4
Press or to select TEL/FAX.
¡To return to the TEL mode, select TEL.
5
Press (START/COPY/SET).
6
Press (MENU).
7
If the FAX indicator light is on, press
(AUTO\RECEIVE) to turn off the AUTO RECEIVE
mode.
TEL/FAX MODE
SETUP ITEM [ ]
MODE=TEL/FAX[ML]
MODE=TEL [ML]
MANUAL RECEIVE
SYSTEM SET UP
(START/COPY/SET)
(MENU)
Dial keypad
Changing from the TEL mode to the TEL/FAX mode!
Change the MANUAL RECEIVE setting from the TEL mode to the TEL/FAX mode.
Hints for using the TEL/FAX mode!
» If an extension telephone is connected, the facsimile unit and the extension telephone will ring as
follows.
The extension telephone
will ring twice.
TEL/FAX ring count
The facsimile unit will ring up to
3 times.
Silent fax recognition ring count
5 sec.
If a fax calling tone (slow beep) is
detected, the unit will automatically
activate the fax function to receive
documents without ringing.
The unit will
automatically activate
the fax function to
receive documents.
Note:
¡You can change the number of rings for the TEL/FAX ring count and silent fax recognition ring count (see
page 65).
¡The facsimile unit will display the following message when the extension telephone starts to ring.
INCOMING CALL
The FAX indicator is off.
TEL/FAX mode (cont.)!