Dell 2200 Personal Computer User Manual


 
36 Solving Problems
www.dell.com | support.dell.com
Mouse Problems
IF YOU CONNECTED THE MOUSE BEFORE TURNING ON THE
COMPUTER, RECONNECT THE MOUSE CABLE
1 Press <Ctrl><Esc> to display the Start menu.
2 In Windows XP, type u, press the keyboard arrow keys to highlight Shut down
or Turn Off, and then press <Enter>. In Windows 2000, press the keyboard
arrow keys to highlight Shut Down, and then press <Enter>.
3 After the computer turns off, reconnect the mouse cable as shown on the
START HERE sheet for your computer.
4 Start the computer.
IF YOU CONNECTED THE MOUSE AFTER TURNING ON THE COMPUTER,
REMOVE THE POWER CABLE, AND THEN RECONNECT THE MOUSE
CABLE If the mouse is connected after the power is turned on, the mouse
will appear to be nonfunctional. To make the mouse function properly:
1 While your computer is on, remove the power cable from the back of the
computer.
2 Connect the mouse to the computer.
3 Reconnect the power cable.
4 Turn on your computer.
Pressing the power button does not clear the computer’s settings and does not
restore mouse functionality.
CHECK THE MOUSE SETTINGS
Windows XP
1 Click the Start button, click Control Panel, and then click Printers and Other
Hardware.
2 Click Mouse.
3 Try adjusting the settings.
Windows 2000
1 Click the Start button, point to Settings, and then click Control Panel.
2 Double-click the Mouse icon.
3 Try adjusting the settings.
CHECK FOR INTERRUPT REQUEST CONFLICTS See page 47.