Filter
Top Products
Menu item Description
Parallel with ENA
ENA Address
ENA Netmask
ENA Gateway
• ENA Address sets the network address information for an external print server
that is attached to the printer using a parallel cable
• ENA Netmask sets the netmask information for an external print server that is
attached to the printer using a parallel cable
• ENA Gateway sets the gateway information for an external print server that is
attached to the printer using a parallel cable
Note: Parallel with ENA is available only if the printer is attached to an external print
server through the parallel port.
SMTP Setup menu
Use the following menu to configure the SMTP server.
Menu item Description
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
Specifies SMTP server and port information
Note: 25 is the factory default setting for each SMTP Gateway Port menu
item.
SMTP Timeout
5–30
Specifies the amount of time in seconds before the server stops trying
to send the e-mail
Note: 30 seconds is the factory default setting.
Reply Address
Specifies server information. This is a required item.
Note: The message box has a limitation of 512 characters.
Use SSL
Disabled
Negotiate
Required
Sets the printer to use SSL for increased security when connecting to the
SMTP server
Notes:
• Disabled is the factory default setting for Use SSL.
• When the Negotiate setting is used, your SMTP server determines if
SSL will be used.
SMTP Server Authentication
None
Plain (Simple)
CRAM MD5
Digest MD5
NTLM
Kerberos 5
Specifies the type of user authentication required for scan to e-mail
privileges
Note: None is the factory default setting.
Understanding printer menus
94