Filter
Top Products
8. Gently slide the drive into place until the tabs securely click into position.
9. Attach the floppy-drive data cable to the back of the floppy drive.
10. Connect the power cable to the power input connector on the drive.
11. Close the computer cover, reconnect your computer and devices to their electrical outlets, and turn them on.
Floppy-Drive Cable Attachment
Removing and Installing a 5.25-Inch Removable Media Drive— Small Desktop Computer
1. Unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer. Change any settings necessary for your
configuration.
2. Open the computer cover.
3. Remove the removable media drive data cable from the drive.
4. Remove the power cable and audio cable from the drive.
Removable Media Cable Removal
1
floppy-drive cable
3
floppy-drive cable connector
2
power cable
4
floppy-drive connector