Filter
Top Products
6. Close the computer cover.
7. Reconnect the computer and devices to their electrical outlets, and turn them on.
8. Enter system setup and enter the current time and date. Then exit system setup and save the information.
For more information on entering system setup, see your User's Guide.
9. Turn off your computer and disconnect it from its electrical outlet. Leave the computer off for at least 10 minutes.
10. Reconnect the computer to its electrical outlet and turn it on.
11. Enter system setup, and check the date and time.
12. If the time and date are still incorrect, contact Dell for technical assistance.
Back to Contents Page
1
battery
2
battery socket
NOTE: If enabled, the Chassis Intrusion option will cause the following message to be displayed at the next computer start-up: ALERT! Cover was
previously removed.