Filter
Top Products
90 Adding and Replacing Parts
www.dell.com | support.dell.com
NOTICE: When the hard drive is not in the computer, store it in protective
antistatic packaging. See "Protecting Against Electrostatic Discharge" on
page 15.
9
Lift the hard drive door until you hear a click.
10 Slide the hard drive out of the computer.
11 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE: Use firm and even pressure to slide the drive into place. If you use
excessive force, you may damage the connector.
12
Insert the drive into the bay, and lift the hard drive door. Push the hard
drive until it is fully seated in the bay. Press the hard drive door down.
13 Replace and tighten the screw(s).
14 Use the Operating System CD to install the operating system for your
computer (see page 81).
15 Use the Drivers and Utilities CD to install the drivers and utilities for
your computer (see page 75).
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original or comparable foam
packaging. Otherwise, the hard drive may be damaged in transit.