Filter
Top Products
5-4 Dell PowerEdge Cluster (PowerEdge 4200) Installation and Troubleshooting Guide
The dialogue box Snmp.exe -
Entry Point Not Found
appears during system start-up.
The Windows NT system
errantly reports this condi-
tion if the Simple Network
Management Protocol
(SNMP) service was
installed after Windows NT
and the Service Pack was
installed.
Reapply the Service Pack that came with
Windows NT Enterprise Edition.
Attempts to connect to a cluster
using Cluster Administrator fail.
The Cluster Service has not
been started, a cluster has
not been formed on the sys-
tem, or the system has just
been booted and services are
still starting.
Verify that the Cluster Service has been started
and that a cluster has been formed. Use the Event
Viewer and look for the following events logged
by ClusSvc:
Microsoft Cluster Server successfully
formed a cluster on this node.
or
Microsoft Cluster Server successfully
joined the cluster.
If these events do not appear, refer to the
Microsoft Cluster Server Administrator’s Guide
for instructions on setting up the cluster on your
system and starting the Cluster Service.
Table 5-1. Troubleshooting
(continued)
Problem Probable Cause Corrective Action