Filter
Top Products
Installing System Components 79
Figure 3-2. Removing and Replacing the Optional Front Bezel
To replace the optional bezel, hook the right end of the bezel onto the chassis,
then fit the free end of the bezel onto the system. Secure the bezel with the
keylock. See Figure 3-2.
Information Tag
The information tag is a slide-out label panel for system information
including the Express Service tag, Embedded NIC1 MAC address, and
iDRAC6 Enterprise card MAC address.
Removing the Information Tag
1 Remove the front bezel. See
"Removing and Replacing the Optional
Front Bezel."
2
Pull the information tag out of its slot in the chassis until it is in the locked
position. See Figure 1-1 in "About Your System" for the location of the
information tag slot.
3
Pull the tag to the right until it disengages from the slot in the chassis to
release the left portion of the tag.
1 release latch 2 keylock
3 bezel 4 hinge tab
3
2
1
4