Filter
Top Products
Error Code Message Information
Details Either the BIOS, BMC/iDRAC, LOM, or NIC firmware is out of date and
does not support FlexAddress.
Action Update BIOS, BMC/iDRAC, LOM, and mezzanine card firmware. If the
issue persists, see Getting Help.
PCI3004
Message Device option ROM on mezzanine card <
number
> failed to support
Link Tuning or FlexAddress.
Details Either the BIOS, BMC/iDRAC, or mezzanine card firmware is out of
date and does not support FlexAddress.
Action Update BIOS, BMC/iDRAC, and mezzanine card firmware. If the issue
persists, see Getting Help.
PCI3006
Message Failed to get Link Tuning or FlexAddress data from iDRAC.
Details Either the BIOS or BMC/iDRAC firmware is out of date and does not
support FlexAddress.
Action Update BIOS, and BMC/iDRAC firmware. If the issue persists, see
Getting Help.
PCI3008
Message A non-fatal PCIe error detected on a component at bus
<
bus
>device<
device
>function <
func
>.
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and reinstall
the device at the next service window.
PCI3010
Message A non-fatal IO error detected on a component at bus
<
bus
>device<
device
>function <
func
>.
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and reinstall
the device at the next service window.
PCI3012
Message The QuickPath Interconnect (QPI) width degraded.
Details System performance may be degraded. The bus is not operating at
maximum speed or width.
Action Reset the system, if the problem persists reinstall processors.
PCI3014
Message A non-fatal PCIe error detected on a component at slot <
number
>.
Details System performance may be degraded.
102