Filter
Top Products
Error Code Message Information
Action If removal was unintended, check presence, then reinstall or
reconnect.
HWC2006
Message The <
name
> is not installed correctly.
LCD Message The <
name
> is not installed correctly. Check connection.
Details The device may be necessary for proper operation. System
functionality may be degraded.
Action Check presence, then re-install or reconnect.
HWC2008
Message A fabric mismatch detected between IOM and mezzanine card
<
number
>.
Details The fabric type for the IOM and mezzanine cards must match.
Action Check chassis fabric type in CMC GUI and compare to the type of
IOM or mezzanine card.
HWC2011
Message The riser board cable or interconnect is not connected, or is
improperly connected.
LCD Message Riser board cable or interconnect failure. Check connection.
Details The riser blade cable may be necessary for proper operation. System
functionality may be degraded.
Action Check the riser board or interconnect presence, then reinstall or
reconnect.
HWC3000
Message The <
name
> is removed.
Details The removed device may be necessary for proper operation. System
functionality may be degraded.
Action If removal was unintended, check presence of the removed device,
then reinstall or reconnect
HWC3002
Message Server <
number
> is removed.
Action If removal was unintended, check presence of the server, then
reinsert.
HWC3004
Message IO module <
number
> is removed.
Action If removal was unintended, check presence of the IO module, then
reinsert.
88