Filter
Top Products
Figure 19. Removing and Installing the Hard-Drive/SSD Backplane
1. guide pins (3) 2. guides (3)
3. hard-drive/SSD backplane 4. hard-drive/SSD connectors (2)
5. hard-drive backplane/SSD connector
Installing The Hard-Drive/SSD Backplane
1. Open the blade.
2. Align the guides on the hard-drive/SSD backplane with the guide pins on the system board.
3. Press down the backplane until the connectors on the backplane and the system board are fully engaged.
4. Install the hard drives/SSDs in their original locations.
5. Close the blade.
6. Install the blade in the enclosure.
52