Filter
Top Products
Configuring Switching Information 357
MSTP Interface Settings
Use the MSTP Interface Settings page to assign MSTP settings to specific interfaces.
To display the MSTP Interface Settings page, click Switching
→
Spanning Tree
→
MSTP Interface
Settings in the tree view.
Figure 7-47. MSTP Interface Settings
The MSTP Interface Settings page contains the following fields:
•
Instance ID —
Selects the MSTP instances configured on the switch. Possible field range is 1–15.
•
Interface —
Selects either a Unit/Port or LAG for this MSTP instance.
Table 7-23. MST
CLI Command Description
instance Maps VLANS to an MST instance.
name Define the configuration name for an MST instance.
revision Identifies the configuration revision number of an MST instance.
spanning-tree max-hops Sets the MSTP Max Hops parameter to a new value for the common
and internal spanning tree.
spanning-tree mst configuration Enables configuring an MST region by entering the multiple spanning-
tree (MST) mode.
spanning-tree mst priority Sets the switch priority for the specified spanning-tree instance.