Filter
Top Products
Configuring Switching Information 433
–
Available
— Specifies available power sourcing equipment's power value in tenths of watts on the
port of local device.
–
Source
— Specifies power source of this port.
–
Priority
— Specifies PSE port power priority.
•
Extended PoE PD
— If an extended PD TLV is present in LLDP frame, the following information
displays:
–
Required
— Specifies required power device power value in tenths of watts on the port of local
device.
–
Source
— Specifies power source of this port.
–
Priority
— Specifies PD port power priority.
Viewing LLDP-MED Local Device Information with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• LLDP Commands
The following table summarizes the equivalent CLI commands for this feature.
LLDP-MED Remote Device Information
Use the LLDP-MED Remote Device Information page to view the advertised LLDP data advertised by
remote devices.
To display the LLDP-MED Remote Device Information page, click Switching
→
LLDP
→
LLDP-MED
→
LLDP-MED Remote Device Information in the tree view.
Table 7-55. LLDP-MED Local Device Information Command
CLI Command Description
show lldp med local-device Displays the advertised LLDP local data.