Filter
Top Products
688 Configuring Quality of Service
•
Subnet Mask
— The subnet mask of the destination IP address. This field is required when
Destination IP Address
is checked.
•
Source L4 Port
— Requires a packet’s TCP/UDP source port to match the port listed here. Select one
of the following options:
–
Select From List
— Click to select from a list of well known source ports to which packets are
matched.
–
Match to Port
— Click to add a user-defined Port ID to which packets are matched. Range is 0-
65535.
•
Destination L4 Port
— Requires a packet’s TCP/UDP destination port to match the port listed here.
Select one of the following:
–
Select From List
— Select from a list of well known destination ports to which packets are
matched.
–
Match to Port
— Click to add a user-defined Port ID to which packets are matched. Range is 0-
65535.
•
Protocol
— Requires a packet’s protocol to match the protocol listed here. Select one of the following:
–
Select from List
— Select from the drop-down list of protocols.
–
Match to Protocol ID
— Enter a protocol ID to which packets are matched. Range is 0-255.
•
EtherType
— Requires a frames’ Ethertype to match the Ethertype listed here. Select one of the
following:
–
Select from List
— Select from the drop-down list of EtherTypes.
–
Match to Value
— Enter an Ethertype ID to which packets are matched. Range is 0600-FFFF.
•
Class of Service
— Requires a packet’s Class of Service (CoS) for incoming packets to match the CoS
entered here. Range is 0-7.
•
Source MAC Address
— Requires a packet’s Source MAC Address for incoming packets to match the
address entered here.
•
Source MAC Mask
— Specifies the Source MAC address wildcard mask. Wild card masks determine
which bits are used and which bits are ignored. A wild card mask of 00.00.00.00.00.00 indicates that no
bit is important. A wildcard of FF:FF:FF:FF:FF:FF indicates that all bits are important. This field is
required when
Source MAC Address
is checked.
•
Destination MAC Address
— Requires a packet’s Destination MAC Address for incoming packets to
match the address entered here.
•
Destination MAC Mask
— Specifies the Destination MAC address wildcard mask. Wild card masks
determine which bits are used and which bits are ignored. A wild card mask of 00.00.00.00.00.00
indicates that no bit is important. A wildcard of FF:FF:FF:FF:FF:FF indicates that all bits are
important. This field is required when
Destination MAC Address
is checked.
•
VLAN ID
— Requires a packet’s VLAN ID for incoming packets to match the VLAN ID entered here.
Range is 0-4095.