Filter
Top Products
112 Adding and Replacing Parts
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
Removing the Optical Drive
1
Follow the procedures in "Before You Begin" on page 107.
2
Turn the computer over.
3
Remove the locking screw from the optical drive.
4
Using a plastic scribe, push the notch to release the optical drive from the bay.
5
Slide the optical drive out of the bay.
Replacing the Optical Drive
1
Slide the optical drive into the bay.
2
Replace and tighten the locking screw.
1 optical drive 2 locking screw 3 notch
3
1
2
book.book Page 112 Thursday, August 7, 2008 5:00 PM