Filter
Top Products
120 Adding and Replacing Parts
Wireless Mini-Cards
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
If you ordered a wireless Mini-Card with your computer, the card is already
installed. Your computer supports
Wireless Local Area Network (WLAN)
Mini-Card.
Removing Mini-Card
1
Follow the procedures in "Before You Begin" on page 107.
2
Turn the computer over.
3
Loosen the eight captive screws securing the cover and remove the cover.
1 cover 2 captive screws (8)
2
1
book.book Page 120 Thursday, August 7, 2008 5:00 PM