Filter
Top Products
Embedded System Management
The Dell Lifecycle Controller provides advanced embedded systems management throughout the
server’s lifecycle. The Lifecycle Controller can be started during the boot sequence and can function
independently of the operating system.
NOTE: Certain platform configurations may not support the full set of features provided by the
Lifecycle Controller.
For more information about setting up the Lifecycle Controller, configuring hardware and firmware, and
deploying the operating system, see the Lifecycle Controller documentation at dell.com/esmmanuals.
iDRAC Settings Utility
The iDRAC Settings Utility is an interface to setup and configure the iDRAC parameters using UEFI. You
can enable or disable various iDRAC parameters using the iDRAC Settings Utility.
NOTE: Accessing some of the features on the iDRAC Settings Utility requires the iDRAC7 Enterprise
License upgrade.
For more information on using iDRAC, see the iDRAC7 User's Guide at dell.com/esmmanuals.
Entering The iDRAC Settings Utility
1. Turn on or restart the managed system.
2. Press <F2> during Power-on Self-test (POST).
3. In the System Setup Main Menu page, click iDRAC Settings.
The iDRAC Settings screen is displayed.
Changing The Thermal Settings
The iDRAC Settings Utility enables you to select and customize the thermal control settings for your
system.
1. Enter the iDRAC Settings utility.
2. Under iDRAC Settings → Thermal → User Option, select between the following options:
• Cooling Options
• Fan Speed Offset
NOTE: When the User Option is set to the default Auto setting, the user option cannot be
modified.
3. Set the Fan Speed Offset field.
4. Click Back → Finish → Yes.
25