Filter
Top Products
Error Code Message Information
Action Cycle input power, update component drivers, if device is
removable, reinstall the device.
PCI1360
Message A bus fatal error was detected on a component at slot
<number>.
Details System performance may be degraded, or system may fail to
operate.
Action Cycle input power, update component drivers, if device is
removable, reinstall the device.
PST0128
Message No memory is detected.
Details System BIOS was unable to detect memory in the system.
Action Re-seat the memory modules. If the issue persists, see
Getting Help.
PST0129
Message Memory is detected, but is not configurable.
Details System BIOS detected memory, but was unable to configure
the memory for system operation.
Action Compare system memory installation to supported system
memory configurations.
RFM1008
Message Failure detected on Removable Flash Media <name>.
Details An error was reported during a SD card read or write.
Action Reseat the flash media. If the problem persists, see Getting
Help.
RFM1014
Message Removable Flash Media <name> is write protected.
Details The card is write-protected by the physical latch on the SD
card. A write-protected card cannot be used.
Action If unintended, remove the media and disable write
protection.
SEC0031
Message The chassis is open while the power is on.
Details The chassis is open. System performance may be degraded,
and security may be compromised.
Action Close the chassis. Check system logs.
89