Filter
Top Products
Figure 22. Removing and Installing the Expansion-Card Riser
1. expansion-card riser 2. release tab
3. guide pins (2) 4. expansion-card riser connector
Installing The Expansion-Card Riser
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Align the expansion-card riser with the connector and the guide pins on the system board.
2. Lower the expansion-card riser into place until the expansion-card riser is fully seated in the
connector.
3. If applicable, reinstall the expansion card into the expansion-card riser.
For more information, see Installing An Expansion Card.
4. Close the system.
5. Reconnect the system to the electrical outlet and turn the system on, including any attached
peripherals.
6. Install any device drivers required for the card as described in the documentation for the card.
52