Filter
Top Products
Error Code Message Information
LCD Message Internal Dual SD Module <name> failed. Check SD Card.
Details The SD card module is installed but improperly configured or
failed to initialize.
Action Reinstall the SD module and remove and reinstall SD cards.
RFM2006
Message Internal Dual SD Module <name> is write protected.
Details The module is write-protected. Changes may not be written
to the media.
Action If unintended, remove the media and disable write
protection.
SEC0031
Message The chassis is open while the power is on.
LCD Message Intrusion detected. Check chassis cover.
Details The chassis is open. System performance may be degraded,
and security may be compromised.
Action Close the chassis. Check system logs.
SEC0033
Message The chassis is open while the power is off.
LCD Message Intrusion detected. Check chassis cover.
Details The chassis was opened while the power was off. System
security may have been compromised.
Action Close the chassis and verify hardware inventory. Check
system logs.
SEL0006
Message All event logging is disabled.
Details This message is displayed when all event logging has been
disabled by the user.
Action If unintended, re-enable logging.
SEL0008
Message Log is full.
Details When the event log is full, additional events are not written
to the log. Older events may be overwritten and lost. This
message may also appear if the user disabled event logging.
Action Backup and clear log.
SEL0012
Message Could not create or initialize the system event log.
125