Filter
Top Products
Service Library: Reboot
Important: Some options of the Web User Interface take the library OFFLINE. This
inactive mode can interfere with host-based application software,
causing data loss. Ensure that the library is idle before attempting to
perform any remote operations that will take the library OFFLINE.
This page is used to perform a library reboot. There is a default time delay when
the Web User Interface page refreshes itself. This time should be sufficient to
reload the page. However, during a reboot, the connection to the library may be
lost. If the connection is lost, the user will have to reload the page manually.
Import and Export Media during Normal Library Operation
Import Media
Data cartridges can be inserted and taken out of a magazine while the library is in
operation. If the library contains an I/O Station, and you wish to import media,
follow these steps:
1. Go to Main → Control → Open I/O Station. The I/O Station will unlock itself.
2. Pull out the magazine and insert a data cartridge(s) into the I/O Station. On a
2U library, only 1 cartridge can be inserted at a time. On the 4U library, 3
cartridges can be inserted at one time.
a77ug097
Figure 5-55. The 4U library Service Library: Upgrade Firmware page
a77ug077
Figure 5-56. Service Library: Reboot page
Chapter 5. Operations 5-55