Filter
Top Products
1
Two EIA units for round hole and
square hole installation
3 Wide Gaps within the EIA unit
2 4 Narrow Gaps between EIA units
3. Remove the adhesive security tape on the backside of the rails. Using the
screws for your rack type (round holes or square holes) and a #2 Phillips
screwdriver and ensuring that the flange on each rail points toward each other
to form a shelf, secure one rail to each side of the rack in your chosen rack
location. Secure both the front and back of each rail to the rack, then tighten all
8 screws. The narrow end of each rail goes to the rear of the rack. The rails
extend to fit a variety of rack depths. Each rail requires 2 EIA units of rack
space (1 in Figure 4-8).
a77ug133
1
3
4
2
1 2
Figure 4-7. Examples of EIA units for round hole and square hole installations
1
a77ug009
Figure 4-8. Rear view of a rack showing the narrow part of the rail
4-8 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide