Filter
Top Products
Table 8-2. Sub error codes (continued)
36 Error during sled movement in FLMoveSled function
37 Error during sled positioning to sensor in FLMoveSled function
38 Error during sled positioning to mail slot in FLMoveSled function
39 Error during sled positioning without sensor
40 Movement to/from slot failed
41 Error during first slider movement
42 Error during first gripper movement
43 Error during second slider movement
44 Error during second gripper movement, get range failed
45 Error during third slider movement, move home failed
50 Preposition to drive failed
51 Elevator movement to home sensor failed.
52 Sled movement to home sensor failed.
53 Error during sled movement to drive position.
54 Error during rotation to drive position.
55 Error during elevator movement in drive position.
56 Error during sled movement to rotation position.
57 Error during rotation to end position.
60 Move from/to drive failed.
61 Error during first slider movement.
62 Error during first gripper movement.
63 Error during second slider movement.
64 Error during second gripper movement, get range failed.
65 Error during third slider movement, move home failed.
70 Release magazine failed.
71 Error during sled movement to rotation position.
72 Error during rotation to unlock position.
73 Error during move sled to block.
80 Opening I/O slot failed.
81 Error during movement to I/O slot open position.
82 Error during moving back - sensor was found.
90 Movement to home position failed.
91 Elevator movement to home position failed.
92 Error during sled movement to rotation position.
93 Error during rotation to home or far position.
8-10 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide