Filter
Top Products
Chapter 3 Element Function|ScrEdit Software User Manual
3-14 Revision Apr. 30th, 2007, 2007PDD23000002
Property Description of Goto Screen / Previous Page / Previous View Buttons
Foreground Color
Style
(Please refer to Table 3.2.2 Property Description of General Buttons.)
Function The user can modify the element characteristic directly without re-create a new
element. The elements that their characteristics can be modified directly by using
this option are: Goto button, Previous page and Previous view buttons.
Trigger
Trigger Mode
The user can use this setting to trigger the designated controller address to be ON
before or after writing the setting value. Please note that this function can only
trigger the controller address to be ON. If the controller address needs to be
triggered again, the user should set the address to be OFF manually.
This dialog box will pop up only when the button function is “Goto screen”.
Close Sub-
Screen
When this option is selected, it indicates that this Goto screen
button is only valid in Sub-Screen. When pressing this button, the
current (active) sub screen will be closed.
Detail
User’s security
level will be set
to Low Security
after changing
screen.
When this option is selected, it will force the current user’s priority
to be the lowest after the button is pressed. This can prevent the
misoperation made by the user (operator).
User Security Level Use this option to set the user priority for pressing this element. Only the priority
that is equal to or higher than the current setting can use this element.
Goto Screen When clicking this option, the following dialog box will pop up:
In this “Open Screen” dialog box, the user can select the desired screen from left
side and the preview screen will display on the right side. After selecting the screen
and pressing OK button, HMI will record the designated screen to this Goto button
element.