Filter
Top Products
Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
2-60 Revision Apr. 30th, 2007, 2007PDD23000002
Fig. 2.7.14 Screen Properties dialog box
Table 2.7.2 Screen Properties setting
Function Description
Screen Number The screen number range is within 1~65535 and the number cannot be
repeated.
General View
Screen
Regarded as general view screen. The element created by the user can be
downloaded to HMI after compile operation and display on HMI screen.
1. Regarded as print screen. The printer can print the element created by
the user after a compile operation. This option is only available in DOP
series HMI which supports printer function.
2. When Apply Print Screen function is selected, the editing range will be
scaled to the actual paper size of the printer. The user can only print
the elements within the range of the paper size. This option is usually
used for print typesetting.
The user can find a printer setting by clicking Option > Configuration >
Print shown as Fig. 2.7.15 below.
Screen
A
pplication
Apply Print
Screen
Fig. 2.7.15 Print tab in Configuration option