Filter
Top Products
Chapter 1 Introduction|ScrEdit Software User Manual
1-2 Revision Apr. 30th, 2007, 2007PDD23000002
Support Multiple PLC’s Connections
One DOP series HMI can connect to multiple controllers in serial through COM2 of RS-485 port
(NOTE 1)
.
Simulation Function
(NOTE 2)
HMI ScrEdit software provides simulation feature which allows the user to develop and debug software
on the PC connected to DOP series HMI before downloading it to DOP series HMI.
Off-line Simulation: When the editing and compile operation is completed, the user can use off-line
simulation function to simulate HMI operation and check if it is correct or not through the PC directly
without connecting to the controller.
On-line Simulation: When the editing and compile operation is completed, the user can use on-line
simulation function to simulate HMI operation and check if it is correct or not through the PC directly with
connecting to the controller.
Using SM Card to Backup Data
SM card can also be used to backup data or transfer data to another HMI. After data transmission, the
data can be saved into the FLASH memory of HMI. History list and alarm message can be also saved in
SM card and the user can read these files by card reader for collecting data and printing.
Multiple Security Protection
It provides passwords to protect designer’s intellectual property rights and also for the user to set the
user’s priority for important components. Only the user, whose priority is higher than the component, can
use the component.
USB Host Port (USB Host) Equipped
Parts of DOP series HMIs have a built-in USB Host interface for the connection to USB flash drive, card
reader and printer with USB socket. The user can save data, copy program and print the screen
immediately and increase the data storage space.
Multiple Security Protection
It provides passwords to protect designer’s intellectual property rights and also for user to set user
priority for important component.
Multi-Language Support
It is easy for the user to switch the desired language via HMI or the external controller. Furthermore,
Unicode editing is supported, and therefore it is convenient for the user to create and edit more quickly.