50
(1) Transmission speed screen
SET SPEED
< OPTICAL >
1: 2400 4: 38400
2: 9600 5: 57600
3:19200 6:115200
Selecting "1:TRANSMIT SPEED" on the SET OPTI-
CAL screen calls up the screen shown at left.
Select the desired transmission speed by using
the numerical keys or F5 and F6 keys, and then
press the ENT key.
To return to the SET OPTICAL screen, press the C
key.
(2) IR beam output pulse width screen
SET PULSE WIDTH
< OPTICAL >
1:1.63us
2:3/16 Bit Time
Selecting the "2:PULSE WIDTH" on the SET OPTI-
CAL screen calls up the screen shown at left.
1 1.63us: 1.63 µs
2 3/16 Bit Time: 3/16 bit time
Select the desired pulse width by using the nu-
merical keys or F5 and F6 keys, and then press
the ENT key.
To return to the SET OPTICAL screen, press the C
key.
(3) Communications protocol option menu
SET PROTOCOL
< OPTICAL >
1:SERIAL No.
2:H.PARITY
3:LINKUP TIME
4:FIELD SPACE
Selecting "3: PROTOCOL" on the SET OPTICAL
screen calls up the screen shown at left.
1 SERIAL No.: Switches to the serial number
ON/OFF screen.
2 H. PARITY: Switches to the horizontal
parity ON/OFF screen.
3 LINKUP TIME: Switches to the timeout
length screen.
4 FIELD SPACE: Switches to the space code
handling screen.
Select a desired screen by using the numerical
keys or F5 and F6 keys, and then press the ENT
key.
To return to the SET OPTICAL screen, press the C
key.
If the BHT-Ir protocol has been selected, the
serial number and horizontal parity settings
will be ignored.
NOTE