Filter
Top Products
59
Chapter 2. Getting Started the BHT-6000 and System Mode
[ 5 ] Testing
Selecting "5: TEST" on the SYSTEM MENU calls
up the screen shown at left.
1 BARCODE : Selects the bar-code reading test.
2 MEMORY : Selects the RAM read/write test
and the address test.
3 BEEPER : Selects the beeper scale test.
4 AGING : Selects the aging test.
5 COMMUNICATION
: Selects the communications test.
6 LCD : Selects the LCD and reading con-
firmation LED tests.
7 KEY : Selects the key entry & beeper test.
8 FILE : Selects the file checksum test.
Select a desired setting by using the numerical
keys or F5 and F6 keys, and then press
the ENT key. The screen returns to the SYSTEM
MENU.
Reversed is the current setting.
To return to the SYSTEM MENU, press the C key.
TEST
1:BARCODE 6:LCD
2:MEMORY 7:KEY
3:BEEPER 8:FILE
4:AGING
5:COMMUNICATION
If an error occurs in any of the above tests, contact your nearest dealer.
NOTE