Dialogic SS7G21 Server User Manual


 
23
Dialogic
®
SS7G21 and SS7G22 Signaling Servers Hardware Manual Issue 7
4.2 Declarations of the Manufacturer or Importer
The International Declarations of Conformity for Dialogic
®
SS7G21 and SS7G22 products are copied below,
or can be downloaded from: http://www.dialogic.com/declarations/
Declaration of Conformity
No: D0005
Revision 01
The equipment described below is declared to be in conformity with the following applicable national and international standards.
The conformity is valid ONLY when the equipment is used in a manner consistent with the manufacturer’s recommendations and the
reference documents.
Equipment Type(s): Signalling Server
Dialogic SS7G21
Document No / Edition /Date Title
IEC 60950-1 – 1
st
Edition (2001-10) Safety of Information Technology Equipment [CB Certificate issued]
UL/CSA 60950-1 – 1
st
Edition (2003) Safety of Information Technology Equipment
EN 60950-1: 2001 + A11 Safety of Information Technology Equipment
AS/NZS 60950.1: 2000 Safety of Information Technology Equipment
FCC, 47 CFR Part 15, Class A digital device Radio Frequency Devices - Subpart B - Unintentional Radiators
ICES-003 Issue 4 - Feb 2004, Class A Interference-Causing Equipment Standards - Digital Apparatus
EN 300 386 V1.3.3 (2005-04) ERM; Telecommunication Network Equipment; EMC
EN 55022: 1998 + A2, Class A Limit Information Technology Equipment - Radio Disturbance Characteristics
EN 55024: 1998 + A1 + A2 Information Technology Equipment - Immunity Characteristics
EN 61000-3-2: 2000 + A2 EMC – Limits for Harmonic Current Emissions
EN 61000-3-3: 1995 + A1 + A2 EMC – Limitation of Voltage Changes, Fluctuations and Flicker
CISPR 22 Ed 4.0 (2003-04), Class A Limit Information Technology Equipment - Radio Disturbance Characteristics
TIA/EIA-IS-968 – July 2001, Subpart 4 Technical Requirements for Connection of Terminal Equipment to the Telephone Network
CS-03 Issue 8, A7 – July 2004, Part II Specification for Terminal Equipment, Terminal Systems, Network Protection Devices. Connection Arrangements
ETSI TBR 12 + A1 ed.1 (1996-01) 2048 kbit/s Digital Unstructured Leased Lines (D2048U): Attachment Requirements for Terminal Equipment I/F
ETSI TBR 13 ed.1 (1996-01) 2048 kbit/s Digital Structured Leased Lines (D2048S): Attachment Requirements for Terminal Equipment I/F
Additional information:
Australia test reports :
Nemko test report # 33077 dated 09-Dec-2004 covers AS/NZS 60950
Hursley EMC Services test report # 04R256CR dated 20-Oct-2004 covers EN 300 386
Regions:
European Economic Area (EEA) :Dialogic (address below) declares the equipment in compliance with the essential requirements of EC Council Directives :
1999/5/EC - R&TTE : 2006/95/EC - Safety/LVD : 89/336/EEC – EMC
USA : Dialogic (address below) make this SDoC as Responsible Party for the T1 interface board(s) used in this equipment.
The included T1 interface board(s) are registered with ACTA as number : US: ICKCNNANSS7SPCI
Canada : Dialogic (address below) is the Declaring Party for the T1 interface board(s) used in this equipment.
The included T1 interface board(s) are registered with Industry Canada as number : IC: 885F-SS7SPCI
Australia / New Zealand : Supplier Code N-964 [Dialogic Pty Ltd - Level 12, 1 Pacific Highway North Sydney NSW 2060] : ACN: 064 824 899 .
Any other region where the Regulatory Requirements are satisfied by compliance to the standards declared above.
This Declaration of Conformity is issued by Dialogic Corporation, which is solely responsible for the declared compliance.
Company Address:
Dialogic Corporation
9800 Cavendish 5
th
floor
Montreal, Quebec
Canada, H4M 2V9
Place of Issue:
Dialogic (UK) Limited,
21 Green Lane,
Fordingbridge, Hampshire,
SP6 1HU, UK
Authorized signature, name and function:
John Matthews – Engineering Manager
Date: 02, April, 2007
Dialogic Distribution Limited, our location in Europe operates from:
Unit 4034 Kingswood Avenue Citywest Business Campus, Saggart, Co. Dublin, Ireland.
Copies of this Declaration of Conformity may be downloaded at http://www.dialogic.com/declarations