Dialogic SS7G21 Server User Manual


 
70
Chapter 11 International Warnings
Warning: English (continued)
A microprocessor and heat sink might be hot if the system has been
running. Also, there might be sharp pins and edges on some board and
chassis parts. Contact should be made with care. Consider wearing
protective gloves.
Danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
The system is designed to operate in a typical office environment. Choose
a site that is:
Clean and free of airborne particles (other than normal room dust).
Well-ventilated and away from sources of heat including direct
sunlight.
Away from sources of vibration or physical shock.
Isolated from strong electromagnetic fields produced by electrical
devices.
Protected when in regions that are susceptible to electrical storms. We
recommend you plug your system into a surge suppressor and
disconnect telecommunication lines to your modem during an electrical
storm.
Provided with a properly grounded wall outlet.
Provided with sufficient space to access the power supply cords,
because they serve as the product’s mains power disconnect.
Servers can be too heavy for a single person to lift or move safely.
Depending on the server, use two people or a mechanical assist to lift or
move the server.