Filter
Top Products
47
Dialogic
®
SS7G21 and SS7G22 Signaling Servers Hardware Manual Issue 7
Chapter 8: Tools and Supplies Needed
Procedures in Part II of this manual require the following tools and supplies (see Figure 12):
• Jumper-removal tool or needle-nosed pliers
• Small flat-bladed screwdriver
• Phillips (cross-head) screwdriver (#2)
• Pen or pencil
• Anti-static wrist strap and conductive foam pad (recommended)
• Cable tie
Figure 12. Tools and Supplies Needed
Note: Blue-colored items (such as handles, buttons, and screws) represent service touch points.
Remove power from system before servicing these components. Green-colored items (such as
handles, levers, and buttons) represent hot-pluggable components.
Record the model and serial number of the product, all installed options, and any other pertinent information
specific to the product.
A list of part numbers of available spare parts is provided in Chapter 12, “Part Number Reference”.