Filter
Top Products
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 5 - 41. MAC-based Access Control Settings window
The following parameters may be viewed or set:
Parameter Description
Settings
MBA Global State
Use the radio button to globally enable or disable the MAC-based Access Control
function on the Switch.
Method
Use the pull-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based Access Control. This MAC address list can be
configured in the MAC-based Access Control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based Access Control. Remember, the MAC list must be previously set on the
RADIUS server and the settings for the server must be first configured on the Switch.
Password
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is default.
Authentication Failover
By default, authentication failover is Disabled. If RADIUS servers are unreachable,
authentication will fail. When authentication failover is Enabled, if RADIUS server
authentication is unreachable, the local database will do the autehtnetication.
Max User (1–128)
Enter a value for the maximum number of users, between 1 and 128. The default is
128.
Authorization Network
Enable or disable the Authorization Network.
147