D-Link 28 Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Parameter Description
View Name
Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
view being created.
Subtree OID
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB
tree) that will be included or excluded from access by an SNMP manager.
View Type
Select Included to include this object in the list of objects that an SNMP manager can
access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
To implement your new settings, click Apply. To delete an entry click the corresponding Delete button.
SNMP Group Table
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table window) or community
strings to the views created in the previous window.
To view this window, click Configuration > SNMP Settings > SNMP Group Table:
Figure 2 - 33. SNMP Group Table window
To delete an existing SNMP Group Table entry, click the corresponding Delete button.
The following parameters can be set:
Parameter Description
Group Name Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
group of SNMP users.
Read View Name Specify an SNMP group name for users that are allowed SNMP read privileges to the Switch’s
SNMP agent.
Write View Name Specify an SNMP group name for users that are allowed SNMP write privileges to the
Switch's SNMP agent.
Notify View Name Specify an SNMP group name for users that can receive SNMP trap messages generated by
the Switch's SNMP agent.
User-based
Security Model
SNMPv1 - Specifies that SNMP version 1 will be used.
SNMPv2 - Specifies that SNMP version 2c will be used. The SNMPv2 supports both
39