Filter
Top Products
DES-3550 Fast Ethernet Layer 2 Switch
Figure 6- 57. Access Rule Configuration window (IP)
Configure the following Access Rule Configuration settings:
Parameter Description
Profile ID
This is the identifier number for this profile set.
Mode
Select Permit to specify that the packets that match the access profile are forwarded by
the Switch, according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are not
forwarded by the Switch and will be filtered.
Access ID
Type in a unique identifier number for this access. This value can be set from 1 - 50.
Type
Selected profile based on Ethernet (MAC Address), IP address or Packet Content
Mask.
•
•
•
Ethernet instructs the Switch to examine the layer 2 part of each packet
header.
IP instructs the Switch to examine the IP address in each frame's header.
Packet Content Mask instructs the Switch to examine the packet header
89