Filter
Top Products
DES-3550 Fast Ethernet Layer 2 Switch
Figure 9- 6. Save Changes Screen
Click the Save Configuration button to save the current switch configuration in NV-RAM. The following dialog box will
confirm that the configuration has been saved:
Figure 9- 7. Save Configuration Confirmation
Click the OK button to continue.
Once the Switch configuration settings have been saved to NV-RAM, they become the default settings for the Switch.
These settings will be used every time the Switch is rebooted.
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be
retained while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default
parameters into the Switch's non-volatile RAM, and then restart the
Switch. All other options enter the factory defaults into the current
configuration, but do not save this configuration. Reset System will return
the Switch's configuration to the state it was when it left the factory
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration
parameters to their factory defaults. If the Switch is reset using this screen, and Save Changes is not executed, the Switch
will return to the last saved configuration when rebooted.
Figure 9- 8. Reset window
Reset System
In addition, the Reset System option is added to reset all configuration parameters to their factory defaults, save these
parameters to the Switch's non-volatile RAM, and then restart the Switch. This option is equivalent to Reset Config
followed by Save Changes.
170