Filter
Top Products
DES-3550 Fast Ethernet Layer 2 Switch
Figure 9- 9. Reset System window
Reset Config
The Reset Config option will reset all of the Switch's configuration parameters to their factory defaults, without saving
these default values to the Switch's non-volatile RAM. If the Switch is reset with this option enabled, and Save Changes is
not executed, the Switch will return to the last saved configuration when rebooted.
Figure 9- 10. Reset Config window
Reboot Device
The following window is used to restart the Switch.
All of the configuration information entered from the last time Save Changes was executed, will be lost. Click the Reboot
button to restart the Switch.
Figure 9- 11. Reboot window
Logout
Use the Logout page to logout of the Switch's Web-based management agent by clicking on the Log Out button.
Figure 9- 12. Logout window
171